Leaf And Gravel Grates

- ART. 26 Leaf grate suitable for roof drains Ø mm. 75 – 125

LEAF GRATE is suitable for roof drains with diameters from 75 mm to 125 mm, it is made from thermoplastic material and is resistant to degradation caused by the sun, ozone and other atmospheric and chemical agents. The attachment to the roof drain is optimized by the small hooks present on the inserts of the leaf grate.

- ART. 24 Leaf and gravel grate suitable for roof drains Ø mm. 60 – 160

LEAF AND GRAVEL GRATES are suitable for roof drains from 60 mm to 160 mm in diameter. It has an internal thread into which Art. 24.1 is screwed. Art. 24 and 24.1 are made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.

Lexo me shume

ART. 24.1 FIXING PIECE

The FIXING PIECE Art. 24.1 must be inserted into the roof drain, when necessary and in particular with smaller diameters, cut the anchoring tabs to suit the diameter the tabs should fit tightly and not bend.

- ART. 24.2 Leaf and gravel grate suitable for roof drains Ø mm. 60 – 200

LEAF AND GRAVEL GRATES are suitable for roof drains from 60 A mm to 200 mm in diameter. It has an internal threaded centre piece of the same height as the leaf/gravel grate its self into which Art. 24.1 is screwed. Art. 24.2 and 24.1 are made from thermoplastic materials which are resistant to degradation caused by sun, ozone and other atmospheric and chemical agents.